Starting a new worm bin is easy and only requires a bin, bedding, some food, and yes, the worms. Anyone can learn how to do it.
But as I learned a few years ago, starting a successful, thriving worm bin from scratch where worms won’t try to escape the first night is another matter.
While the following directions are necessary, they are not sufficient to ensure you make a hospitable environment for your worms to eat, poop, and reproduce.
Vermicomposting, especially at the beginner level, is not mechanical. It requires paying close attention to conditions and using a little trial and error to see what works for you because differences in feedstock, ambient humidity, temperature, and breathability of your bin is going to affect all of the other conditions.
According to legend, Abraham Lincoln once said:
Give me 6 hours to chop down a tree and I will spend the first 4 hours sharpening the axe.
This adage holds with vermicomposting and as you will notice, I spend most of my time on what you need to do before you ever touch a worm.
With that in mind, here is a solid 9-step game plan for building your first home bin.
Note: This article is part of a “Vermicomposting 101” series of posts aimed at helping the beginning vermicomposter. The read other “VC101” articles on how to start a worm bin, how to choose worm food, how to maintain moisture, and the differences between composting and vermicomposting, please visit the Vermicomposting 101 section of this site!“
How to Start a Worm Bin: 9 Steps to Vermicomposting Success
Step 1: Select Your New Worm Bin
Surprise! One thing you need when you start a home bin is……well…..the bin! There are several commercial bins on the market, to include:
And there are some cheaper options, particularly a 10-to-18 gallon Rubbermaid bin or a simple 5-gallon bucket, both of which will need holes drilled in the top 6 inches of the sides or on the lids to allow your new bin to breathe.
You can also use a screen material as part (or all) of the top of the bin.
For simplicity’s sake, we’ll concentrate on the Rubbermaid option and my personal favorite (for obvious reasons!), the Urban Worm Bag. Here are the pros and cons of each:
- Decent surface area available
- Poor moisture control
- Requires modification
- Castings are difficult to harvest
- Breathable, maintains excellent aerobic conditions
- Castings are easy to harvest
- Zipper top makes feeding easy
- Free shipping and a lifetime warranty
- Somewhat more expensive
- Can dry out in arid climates
Step 2: Add Bedding and Make the Worm Bin a Home!
Once you have the bin, the next is to dirty it up a bit and start adding your bedding. Now, the best way to start a new worm bin is to steal some of the contents of another bin. (Because, if you’re not cheating, you’re not trying!)
Transplanting an existing hospitable environment rich in microbes into your worm bin is a fast way to turn your worm house into a worm home. So fast, in fact that I think you could shorten your timeline by 10 days or more.
It won’t take too much though. Whatever volume of bedding you were planning to start with, you could probably substitute 25% of that planned volume with existing vermicompost and fill the remaining 75% with new bedding.
In my opinion, the best worm bedding, with or without first inoculating your bin with vermicompost, is aged horse manure. It is rich in microbes and seems to be a good mix of carbon and nitrogen, without being too rich in either which makes it a great “dual purpose” medium as a bedding and secondarily as a food.
There are downsides to horse manure though. If you’re using manure collected from a field, rather than a stall, you will often find rocks, weeds, rope, and other random things that aren’t quite horse manure.
And if you’re preprocessing manure with a chipper shredder or a grinder of some sort, those rocks could destroy your equipment. Weed seeds will also make it through a horse’s gut and remain viable in aged horse manure unless it was thoroughly precomposted.
If you do use horse manure, I would get enough to form an 8-inch layer in whatever bin you’re using and spray it down as needed until it has the feel of a damp sponge….moist, but not dripping water either.
If you can’t procure any horse manure, then I would find as much paper, newsprint, and corrugated cardboard as you can get. Shred it, then soak an appropriate amount for 24 hours.
Simply spraying down shredded paper products will not cut it. You need to allow them achieve peak saturation. So after a 24 hour soak, wring out your saturated paper and cardboard bedding to achieve the “damp sponge” feel and place it in your bin.
This next part is sort of “anything goes,” and sounds like an afterthought, but the more I think back on my own experience, it is critical if you’re starting a bin from scratch without existing living material like horse manure or vermicompost.
So if you can’t import an ecosystem, you’ll need to do your best to simulate one by adding small amounts of the following material to your bin along with your bedding:
- Dead or composted leaves
- A small amount of sand or limestone
- Anything you wouldn’t mind finding in your garden, basically
This creates a diverse, heterogenous mix of different substances with differing textures and physical properties, different states and rates of decomposition.
If you consciously try for an “all of the above” when building your worm habitat, the chances of getting it all wrong are greatly reduced.
Step 3: Get the Microbes Blooming!
So we’ve created a cozy home for your worms, but it’s not move in ready yet. We
have to get the microbial party started by adding some worm food that will decompose fairly quickly.
A lone banana peel or apple core will do the trick. If a microbe population is like a fire, then that banana peel is like one of those starter logs that will really get things going.
You’re probably thinking “Hold on a second. I’m starting my bin from scratch. Why am I feeding my bin if I don’t even have worms yet!”
I know. We’re getting there.
Step 4: Order Your Worms
Note: It is common practice for worm suppliers to only ship on Mondays or Tuesdays to prevent worms from sitting in post office warehouses over the weekend. And their cutoff time for a Monday shipment will often be the previous Friday or Saturday. So if you find yourself ordering worms on a Monday, it is highly likely that your worms won’t ship until the following Monday.
Step 5: Wait
If you have started with a bedding other than aged horse manure or an existing worm habitat like vermicompost, then I can’t stress this point enough.
What we want is an environment rich in microbes that the worms will want to hang out in and eat their 5 little hearts out. A new plastic bin with some wet paper and a fresh banana peel is not going to do the trick. You need to allow the microbes to bloom.
Step 6: Introduce the Worms to the Bin
It’s move in day for your worms! Just drop them in, and help tuck them into their new bedding by keeping your bin (with the cover off) under a bright light for the first night. Worms do not like bright light and will make their way below the surface to escape it.
This greatly reduces the chance of a mass jailbreak in the first 24 hours.
Step 7: Wait Again
Now that the worms are cozy in their new home, you’ll probably be tempted to feed them immediately. Resist this urge because if you’ve prepared the bin correctly, they will have plenty to eat in their new habitat.
Just give the bin a week to settle in. Keep monitoring conditions, but resist the urge to dig around to see how your worms are doing.
Step 8: Start Feeding…..Slowly
Unless you started with a leafy, woody, worm medium, the surface of your worm environment may start to look like the top of a billiards table as the worms have worked through the surface material. This is especially so if you use a layer of carpet, fabric, or cardboard on the top of your bedding and food.
I take this as a green light that it may be time to start feeding in earnest.
But even if you don’t get that “felt” appearance on the surface, your discipline in not overfeeding to this point should pay off and you should be good to go.
However, heed this advice: Don’t get roped in by trying to achieve some X% of worm weight number when it comes to feeding your worms. Rhonda Sherman, one of the preeminent academic experts on vermicomposting, says worms will eat 100-200% of their weight…..per week!
This is far, far less than the oft-repeated 50-100% per day number bandied about.
So if you’ve got a handle on how much to feed, please check out this article on what to feed your worms. If the quantity and quality of your food is appropriate, you will be avoiding many of the pitfalls of the beginning vermicomposter.
Step 9: Monitor Conditions
Without constantly disturbing your worms, it’s a good idea to keep tabs on your worm bin by monitoring the following conditions and making some sensible changes as necessary.
- Maintain temperature inside the worm bin between approximately 60-80 degrees F (15-27 degrees C)
- The easiest way to do this is by storing your bin inside, but if that’s not possible, keep a sheltered bin in the shade.
- A worm bin should be a moist, but not wet environment. Maintain moisture at approximately 60-70%. (Update: I used to suggest a higher number, but I recently wrote this blog post about how I think I was steering you wrong about worm bin moisture!)
- How you maintain a moist environment depends on ambient humidity and temperature, what kind of bin or bed you’re using, what you feed them (most fruits and veggies are 80-90% water), and how much you feed them.
- Every now and then, take a handful of your bin contents and squeeze it in your hand. It should feel have the moisture feel of a damp sponge.
- Your worm bin’s pH should be slightly acidic and will typically remain so unless you begin overfeeding. Lime, rock dust, and/or crushed egg shells can bring things into balance if things get too acidic.
Bonus Tips for Success in Starting a Home Worm Bin
You will be much better cushioned against your own errors with a more expansive environment where worms can better escape the effects of overfeeding, overwatering, underwatering, or other errors you will probably make at first. Think of worm bin size as a buffer against bad things happening.
Air Matters Too
Worm composting is an aerobic process and the quality of your castings (if you intend to use them, and especially if you intend to sell them) is strongly correlated to maintaining highly aerobic conditions in your bed.
To a limited extent, a larger bin, open air bin opens up opportunities for feedstocks like limited amounts of citrus or onions that you should be avoiding in smaller, closed bins due to acidity and/or the increased risk of mold.
Don’t Feed Every Day
The worms will do just fine with a feeding every few days and if you happen to go even a couple weeks without feeding, while it’s not optimal, any negative effects are far more muted than what will happen if you overfeed them.
Practice Benign Neglect
It is is tough not to molest your worms at first. And I guarantee your curiosity will get the best of you at times. Fun, but important, fact: the red wiggler’s bionomial name is eisenia fetida, the “fetid” part describing the smelly mucous a red wiggler can secrete when stressed or disturbed. Now I’ve never actually smelled anything bad on them, but it is known that mites will attack worms under stress, so if your bin features mites, it’s all the better that you leave them alone.
Remember to Keep Adding Bedding
Your days of adding bedding to the worm bin are not over! While I don’t think it’s necessary to add bedding with every feeding, you ARE going to have to add bulking material like shredded paper, cardboard, leaves, and maybe even wood chips from time to time to maintain aerobic conditions.
While underfeeding has fairly benign side effects, “overbedding” has hardly any to my knowledge. In fact, once you think you’ve added enough bedding, I just about guarantee you’re OK to add a little more!
Recognize Signs of Success
Take the following clues that you’re doing something right with your worm bin:
- Cocoons are visible
- Reproducing worms are happy worms!
- Worms aren’t balled up in corners of the bin
- There may be concentrations around pockets of food that they’re destroying, though
- Worms aren’t trying to escape
- If the worms are happy on or below the surface of your bed, you’re probably doing it right!
- There’s a nice, earthy smell to the bin
- Other critters are present
- Your worm bin is an ecosystem, and while not all non-worm organisms are helpful, the fact that you’ve created a diverse environment is a good sign!
Final Thoughts on a Successful Home Worm Bin
Let’s run over the 8 steps again….
- Step 1: Select Your Worm Bin
- Step 2: Add Bedding and Make it a Home
- Step 3: Get the Microbes Blooming
- Step 4: Order Your Worms
- Step 5: Wait
- Step 6: Introduce the Worms
- Step 7: Wait Again
- Step 8: Start Feeding…..Slowly
- Step 9: Monitor Conditions
You can take shortcuts on steps 2 & 3 above in one of two ways:
- Start with already living, thriving vermicompost
…but failing #1 above….
- Start with aged horse manure
If you don’t have access to either of these, you’ll be well served by staying patient and disciplined in your approach to worm composting. There’s just no benefit in rushing it.
So if Abraham Lincoln was a vermicomposter, here is what he might have said:
Give me 4 weeks to start a worm bin and I’ll spend the first 3 preparing the bin.
If you join the wonderful world of worm composting – or if you already have! – please let the rest of the world know by joining the Urban Worm Network, my interactive map of global vermicomposters. You can also find suppliers of worms, vermicompost, worm bins, and other worm-related goodies.
We keep a count of how much waste is diverted daily due to the efforts of Urban Worm Network members. It’s absolutely a thrill to see that number grow.
Today, the Urban Worm Network will recycle: 30378 lbs of waste
Want to help us increase this number? Join the Network today!
The 2019 Vermicomposter's Starter Guide
Your roadmap to a successful beginning in vermicomposting.